Hunting for AC Specialists

Construction companies are always looking for better ways to save time and money. The same rule goes for AC installers as well. Unfortunately, some companies cut corners unnecessarily and put the property and the new owner in jeopardy. The competition for Real Estate is fierce. Whether it be residential or commercial, Builders feel the pressure to get their structures up and the quickest time frame possible. This leads to some companies using lower grade supplies or labor to meet their budget easier. The proper placement of an air conditioning unit is vital to it’s proper operation. When all the contracts are signs, construction companies are committed to using a certain type of material for every aspect of the project. Many times will happen is that along the way they will substitute quality building materials for cheap knock-offs. Once the initial permits are filed, a lot of times there is little oversight once the building has begun. Especially when the work is almost complete.

AC installation


There is no way to go back and make sure that every proper procedure was used. For example let’s say a room needed for studs per wall. The Builder could quickly put up all four walls with only three studs once the drywall where cement board was put into place, no one would be the wiser. If they use a similar procedure throughout an entire building, they would save a lot of time and materials, but the safety of the building would be in question. Not to mention the fact that they are paid to use a certain amount and quality of materials. The second aspect which comes into play quite often is hiring non-qualified workers on the work site.

AC units

While the main AC installers may all be licensed in their field, they often hire common laborers to do most of the work while they oversee from a distance. Every crew member on the team should be just as qualified as the supervisors, but that is not always the case. A certified HVAC technician for instance, May cost $30 to $40 per hour. They may find someone to do the work and half the price but have less skill. Once the building is in place and everyone has been paid, then they initial Builder we’ll just have to hope that no one does a thorough inspection, or they don’t have problems with the building later. They would be better off in the long run if they just did the proper work from the start. This is a small group I’m talking about. The majority of the companies work with high integrity and are very reliable.

Air Conditioners in New Construction Sites

The keywords in construction today are smarter is better. With the demands on new building structures, is important that the materials that go into the structure are of the best quality, while at the same time built with efficiency. Because of new technologies and techniques, contractors are able to put up building structures in a shorter amount of time. Many small units can be put together in pieces off site, and then trucked to the physical location. This allows builders to have a facility where they do most of their framing and prep work in a assembly line fashion. On-site workers become very skilled in these tasks and can meet deadlines and a record amount of time.

framework construction

Once the foundational components are set, then they can be delivered to the physical work site where there are assembled. This added time saving component also let’s contractors think more about the quality of their work. Before when a foundation was laid, it was purely just concrete. That was the norm for several decades, but the methodology is going through some change. With changing climates, it is necessary to prepare each building for any natural disaster. Starting with the foundation, Builders are waterproof chemicals into the concrete to make it more difficult for flooding to occur. Even areas that weren’t prone to flooding in the past are seeing incidences more and more often as time goes on. This off also offers a prime selling point for the realtor. If they can emphasize that the utmost care was put into building the structure, then that much easier will it be for them to sell the property.Contractors also want to keep in mind what other additions to the property are going to be needed down the road. Buildings are going to need heating and AC units installed, and need to make sure there is a place for these pieces. S&S Heating and Air is one of the best air conditioner repair companies in Phoenixville , and often runs into problems putting in the correct unit, because there wasn’t enough space allowed.

making room for rooftop ac unit

On top of the flood guard procedures, The increased efficiency has also allowed for the structure of buildings to be sturdier. Framework is becoming stronger and more reinforced, which adds the utmost safety and value to the consumer. More and more often shopping centers, malls, Office Buildings are being put up in weeks instead of years. This increased efficiency will not only help the financial turnover for a builder, but will also allow them to provide safer sturdier structures.

How to Recondition your Central air Unit to be Efficient

How to Recondition your Central air Unit to be Efficient

To keep your central air unit functioning optimally, you must service it regularly. Some of the work you can do it yourself or contact an expert. Your service provider can assist in servicing the unit by sending their technician. A well-maintained unit will use energy efficiently and last longer. One of the most important aspects of an efficient system is to keep the air filters clean. Dust and dirt can clog the filters and damage them. This will, in turn, result in increased energy usage.

How to do it

1. Yearly service

Every year contact an expert to service your unit. The best time for this exercise is during the spring season. They should clean the coils, replace the filters, drain the drainage system and the pan, and change the vacuum bower compartment.

2. Cleaning the unit

Over time debris will build over the AC unit, this will reduce its efficiency and limit airflow. Wash the condenser coils and vents to clear any debris and dirt. During winter check the filters every month, you may require to replace or clean them. Use a damp piece of cloth to wipe the outside. Shut it off and use a garden hose to clean it.  Here is a guide on cleaning your unit.

3. Check the electrical connection

If you cant do it let your expert assist you. They should check for any loose connections and fix them. Check for any signs of overheating and replace any damaged parts.

4. The thermostat

Think of upgrading it, if it is not programmable. With a programmable thermostat, you can adjust the temperature of your home by either increasing or decreasing the temperature. Check if it is working well.

5. Condenser fan

Check the condenser fan, ensure it is functioning properly. Switch off the power and locate the fan unit. Check if the blades are in good condition or require to be replaced.

After servicing the unit, the technician must make sure that all parts of the unit are working. Parts that require lubrication should be lubricated. For your central air unit to work efficiently, maintain it at the right levels, usually between 5 to 15 %.

To conduct any maintenance of your central unit make sure power is switched off. Maintenance of your Ac unit is important to ensure comfort in your home during extreme weather condition whether summer or winter. A unit that is well maintained will be energy efficient, save on the cost of regular repairs and possible breakdown. It will also last longer.

Air Conditioning Tips to Save You Money

Air Conditioning Tips to Save You Money

In the current tough economic times even the rich are struggling. People are now embracing every trick in their play book just to save money. Energy consumption is one of the easiest ways to save money and live greener. Below are some air conditioning tips to help you save energy and money.

1. Buy a fan

During the summer instead of using an A.C to cool the air you can use a fan instead. The AC uses a lot of electricity than a fan, this can be because a fan is more smaller and does not need a lot of electricity to operate. Further more a fan is also more cheaper than an A.C.

2. Shut or open the vents and the window depending on the temperature

A lot of heat is lost through open windows and vents. Closing them helps to preserve heat in the house, this allows you to switch off the A.C or turn it down because the heat can be preserved in the house during the winter.

When its hot you should open the windows and vents so that there can be circulation of fresh and cool air instead of using the A.C.

3. Buy a portable air conditioner

There are different types and sizes of A.C’s that function differently too. There are larger once that control temperatures of the entire house, these type of A.C’s consume a lot of energy since they control temperature of a larger area.

Portable A.C’s help you save a lot of money because they consume less energy and can control temperatures of a specific room instead of the entire house.

4. Switch off the lights

Bulbs too do produce heat. When it is hot switching off bulbs that are not in use helps in conserving a lot of energy and money in the long run. Or you can also buy energy saver bulbs that save energy and do not produce any heat.

5. Turn the AC down at night

Unless the temperatures are unbearable, you are advised to switch off or turn down the A.C at night. When all the Windows and vents are closed the temperature in the house are stable. By turning off the A.C at night regularly a lot of cash would be saved by the end of the month or year.

6. Turn off the AC when no one is in the house

When no one is in the house, turning off the A.C is a good idea since no one would be using them. This helps you save a lot of money that could have been wasted.

7. Regular maintenance

A faulty A.C consumes more energy and wastes a lot of money when you are repairing it. Servicing the A.C regularly ensures it functions well without hitches and in the process you get to save money.